Which Tool Or Software Can Remove PDF, EGR, Adblue,NOX?

If you are looking for a recommendation for an OBD tool and software for removing or modifying files on most makes and models. Please read this article.

As I know you need more than one tool:

About 90% of people are using clone or reworked tools like kess or mpps.

You need more than one tool:
Hardware: Kess + Ktag for reading/writing
Software: Winols /ECM TITANIUM for modifying files (if you know the maps of it).

If will be for yourself use kess ktag clone is the best option.

the mpps is good but not in all cases . Mpps i think is more fastes . But kess have more ecu`s . For dpf egr etc. you can use ADS DPF, EGR remover but not all solution are good . You need to learn Winols.

For kess, KESS V5.017 No Token RED PCB. it is a clone but is very good.

Read this article: Best ECU programmer China Clone buying guide.

This article is trying to talk about the best ECU programmers China Clone incl. Ktag running ksuite, Kess V2 master running ksuite, FGtech Gallote V54, MPPS V18, renolink Renault ECU programmer etc.

Read this article: Clone Kess 5.017 Ksuite 2.47 review

One more helpful article: all ECU programmer China Clone software download

Hope it helps.

http://blog.obdexpress.co.uk/2019/09/17/an-obd-tool-and-software-for-removing-dpfegradblue-nox/

How to read Kia kefico m7.9.8 with trastata, Ktag and FGTech?

Have Kia kefico m7.9.8 to read the ECU pinout boot mode or BDM, need Ktag, FGTech, transdata.This article is available with how to read FGTECH and how to read with transdata and Ktag etc.

1. Read Kia kefico m7.9.8 with FGTech, here is a tutorial

http://blog.obdexpress.co.uk/2017/08/08/fgtech-galletto-v54-100-readwrite-bosch-mg-7-9-8/

2. Read Kia kefico m7.9.8 with transdata and Ktag, here is a tutorial.

BOSCH_M798_KIA
The LAY by pins are located on the lower part of the ECU
PLUGIN 167


Connect the power (+12v) only for DIRECT CONNECTION,
do not connect power (+12V) with DIMA CONNECTION

DIRECT CONNECTION
Connect the universal wiring to POL4 & POL5 and to the ECU connector as shown in the pictures.


DIMA CONNECTION
Connect the blue wire to POL5 and to DIMA adapter as shown in the picture.


I would advise using pencil, it is always faster, comfortable and clean to work.


From http://www.obdexpress.co.uk/wholesale/bdm-frame-cmd-bdm100-fgtech-kess-ktag.html


http://blog.obdexpress.co.uk/2019/07/30/how-to-read-kia-kefico-m7-9-8/

(Solved)kess v2 2.47 clone read ecu tmax 2007 error "Invalid protocol file"

Trying to use a kess v2 2.47 clone to read an ecu of tmax 2007 and when I click on its protocol I get the error ""Invalid protocol file".


Possible reason:
You have maybe bad protocol file for this ECU on SD card.

Solution:
SD image needs to be created for CID Number SD-card.
Follow the below guide to creation SD card for Kess and Ktag:

 SD Creation Guide for Kess V2 & K-Tag (5.017 & 7.020):
Tools / Software that you will need:

• Winhex (full version is recommended)
• Xorfiles
• win32diskimager

The files I used to do my Kess SD Card, where made / shared by Svvag2000 (Give a Big Thanks to him) and you can search online for this tutorial / files (Guide to creation SD card for Kess and Ktag):

• Kess_5.017 (decrypted SD Image for Kess 5.017)
• KTag_7.020 (decrypted SD Image for KTag 7.020)
• KeyFileGenerator.cmd (Script to generate KeyFile needed)

You can review this video Svvag200 made for help on the procedures:
https://www.youtube.com/watch?v=sE2xVdhSFew

#1: Insert your SD Card in the Card Reader, and Open WinHex
#2: Hit F9 and Select the SD Card / Drive Letter:


#3: Select “Edit – Select All”

#4: Select “Edit – Fill Block”, and make sure value is “00” – Hit OK


Depending on your SD Card Size and reader/system, this might take a while. (my 16Gb Kingston took 30min. so, grab a few beers )

#5: After this is done, you need to remove the SD Card, and put in the device (Kess / KTag), connect to the computer and open KSuite.
Note: If you get the error “External exception EEFFACE”, don’t freak-out. I also had it. Just try several times, connect / disconnect tool from computer or try to leave the tool connected for some minutes, and them open again K-Suite. (I also had to try more than 10times with one of my cards)
Some say the protocols, should be “greyed out”, but in my case they where normal. When I tried to “open” the protocol it just gave me the “No Protocol Found” warning.
After this is done, disconnect the tool from computer and remove SD Card.
#6: Insert SD Card into the Computer, and Open again in WinHex (same as point #2)
#7: Select “Edit – Define Block” – End (Write the blocks we need to select and hit “OK”)

These are the Blocks Value: 000000D0 - 0000019F

#8: Select “Edit – Copy Block – Into New File” (a window will pop out for you to save this new file in the desired location)


Give the file name: “Key” and save it.


#9: Then we need to run the script / batch file “KeyFileGenerator.cmd”


Note: The “Key” file we generated, must be in the same location as the script/batch file.
Some files will be created, but we just need the “KeyFile.bin”, and it should have 127,139,792 bytes.
#10: We format the SD Card in FAT / FAT32 (I don’t think you guys need help on this one)


#11: We copy the content of the folder “Kess_5.017” (decrypted SD Image for Kess 5.017) to the SD Card.


#12: Then, we open again the SD Card in WinHex (same as #2)
#13: Then we do the same as #3 and #8 (Select All & Copy Block Into New File)


Note: Now, assuming your SD is bigger than ±122mb, we need to “cut” the image file we just made.
#14: Open in WinHex, the Image we just created (if you didn’t close, it might be already open in WinHex) and repeat the same operation as #7 & #8, but this time with this block sizes: 0-793FFFF

This is the file we need to use combined with the “Key” file we made in #9. The file should have 127,139,792 bytes
#15: Now we open “XorFiles.exe” and select the files by this order:
FileName 1: KeyFile.bin (Created in #9)
FileName 2: Decrypt_SD.img (Created in #14)
FileName 3: This is the File we Need for our “New SD Card” – Give the Name and Location you like.


#16: New we just need to “Write” our Image file in the New SD Card.
Open and select the drive you want to “write”, select the Image File and hit “Write”:


After this is done, you can put the Sd Card in the Tool, and your all set…
(Finally, you can have some more beers )
NOTE: I´m not the author of any of the information shared in this file. I just put this together to make life easier to other people that might be finding hard to have this SD Card made.
All Credits must go to the Author of these Files (Svvag200), and at least to “pocinas” that made me clear point #14.
I hope this works for you guys… Cheers to All…

Big thanks to @ boxsport (DK forum member).

Last edited by Laurance on July 11, 2019.

www.obdexpress.co.uk

Source:http://blog.obdexpress.co.uk/2019/07/12/sd-creation-guide-for-kess-v2-k-tag/

Ksuite V3.37 free download and Kess 2 clone test results

Ksuite V3.37 free download, installation instructions, test reports...... Ksuite V3.37 or Ksuite V2.47 which one is reliable? If Ksuite V2.47 free download and test reports.

Ksuite V3.37 free download:
https://mega.nz/#!8JI0iKCD!3ir72eWkba3VBXVT6CW2WLCVybD0PQ9sppwg5Xux25s
No password

Ksuite V3.37 installation instructions:
1 Internet off
2 intstall ksuite.exe
3 plug in kessv2 hardware to pc usb port
4 run ksuite v3.37
5 start working( never use with internet )

Ksuite V3.37 test reports: All failure.

1. it will not work, but it will not destroy a Kess V2 5.017 clone. the Problem is the clone will not be recognized by the Software and you cannot see the green button to start the procedure.

2. Ksuite V3.37 doesn't work with ktag 7.020.

software not recognized ktag.

3. Did not work. Ksuite V3.37 redirects to the Alientech store website.

Therefore, Ksuite V2.47 is the newest and reliable version working fine with Kess V2 5.017 clone and Ktag 7.020 ECU programmer.

Crack Ksuite V2.47 free download on mega:
https://mega.nz/#!8QgwSboa!XLUqAJBt6ISsL4ijpdxZ68emHJa8EMAvwLAq_ZRlZPg
Password: laura168.
After free update the newest ksuite v2.47, you can have extra 7400 Vehicles.
No need active, it's crack!
OS: Works on Win XP / Win7 32bit, Win 8, etc.
Multi-language available: English, German, Spanish, Italian, Portuguese, French.
Security: Yes, offered by obdexpress.co.uk engineer.

Crack Ksuite V2.47 workable Kess V2 Clone:

1. SE137-C (green PCB)
2. SE137-F (only main unit)
3. SE137-C1 (red PCB)
4. SE137-C2 (green PCB, Support Online EDC17 Protocols)

Reviews on OBD Read/Write ECU with Ksuite 2.47 running Kess V2 5.017:
Opel Astra H 1,7cdti 2008 81kw denso ecu
Read/write ok no problem

Tested also on bosch me 7.1 golf 4 2,8 24v AUE engine read/write ok!
Edc16c31 bmw read/write ok!
Edc16u34/31 vag read/write ok!

Bosch me7.1 on 2,23 need to read trough protocol 64 I think , but on 2,47 read regular , choose on list model year hp engine code hit read work perfect no protocol need
this is the difference between 2,47 vs 2,23.

Delphi (mercedes sprinter om651) read / write by obd
Ford fiesta 2008 1.6 tdi edc1634 read write by odb
VW passat 1.9tdi PDI read/write by obd
Mercedes w211 om646 read/write by obd

With version 2.11 I already write flash for EDC17CP64 by obd, can't read it by obd, yes I write virtual file, it takes about 13mn to be written.

Edc17C46 writing on obd TESTED !  First I read with KTAG and after write with Ksuite 2.47.

Renault scenic 1,5dci 2007 delphi ecu ddcr read/wirte ok!
Vag edc15 read/write ok!
Bmw ms42 read/wirte ok!
Bmw ms43 read/write ok!

c220 w204.. delphi CRD3...read write ok..

VW Crafter Bosch EDC17CP20 Tricore External read-write OK!

w212 220cdi CRD 2.16 read write obd ok..

Golf 5 EDC16U1 OK
Sharan EDC16U31 OK
Passat PCR2.1 Write OK (ECU was already unlocked)
Alfa 147 ME7.3.1 OK

Audi A6 4G 2012 EDC17cp44 Obd Write ok!

Mercedes-Benz CLS 350 CDI BlueEFFICIENCY 4Matic 7AT with Bosch EDC17CP46 was readed with Kess 2.34 Tricore and written with Kess 2.47 Tricore

Porsche 997 3.8S Year 2006
Bosch ME7.8.x CARTRONIC
HW: 0261207987
SW: 1037369642
Spare: 99761860101
SW upg.: 0041900007103A08
Installation: ME7.8.1

WRITE PERFECT OK
by k-line
i test in bench

BMW 320 E46 EDC16C31 OK
Ford Focus TDCI 1.6 EDC16C36 OK
Peugeot 307CC 1.6/PETROL ME 7.4.5 OK

Volvo EDC16C31 read-write on K-line...TESTED !

MED17.1 2.0 TFSI Audi A5 tested without problems (VR)
EDC16CP34 3.0 TDI without problem
EDC17C64 Skoda Octavia without problem (VR)
Only problem is on getting ID -> have to switch many times the ingnition on off. Then I get an error, that ID can't be read. And after pressing OK it is showing the whole ID and I can save it.

Mercedes Sprinter 906 2008 edc16c31 Read write obd OK!

BMW Bosch EDC16+C35 via CAN Read/Write OBD ok

Volvo S40 continental SID803A read/write ok

BMW E92 M3 2008 Continental MSS60 read and write over OBD work without a problem
Audi A4 Engine: CABB 118 kW (160 HP) 1.8 l Bosch MED17.5 read over OBD OK!

Vag dq250 read / write no problem

1-VW Golf 6 GTD edc17c46 Tprot tricore
Read and write without error CRC OK
2-VW Tigoun EDC17C64 GPT Tricore
Read and write without error CRC OK
3-SEAT LION EDC17C64 GPT TICORE
Read and write without error CRC OK

Mercedes B180 CDI 2010 EDC16C32 R/W OBD....OK !

Audi RS6 4F 5.0 TFSI V10 MED9.1 BUH
Read Master ECU OK -OBD
Write Master ECU OK - OBD
Write Slave ECU OK - OBD
When you write master ECU, fan are running, you need a good battery charger

BMW E70 X5 Bosch EDC17CP09
Bootloader Tricore Protocol 226
Read OK
Write Not OK, problem with checksum correction
After writing with K-Suite 2.34 no problem with starting engine

- Renault Latitude 1.5 Dci 110Hp Sid 305 - Ok.

- Ok audi q5 2.0tdi 2009 EDC17CP14 with protocol 501 work flawless add a good battery charger

- Tested on mercedes gla 220 cdi 4matic crd3
HW: 6519040800
SW: 6519027201
Ricambio: 6519010902
SW agg.: 6519030050
Impianto: CRD3-651-WMIA4D1
read, write and checksum ok, protocol 350

- Renault SID309 ok (car my 2015)

Thanks.
Source:
http://blog.obdexpress.co.uk/2019/07/01/ksuite-v3-37-free-download/

Ktag clone is the cheapest solution for EDC17C60 modification

Car ECU model:

Peugeot Partner 1.6 BlueHDI 2015 with EDC17C60

Purpose:

For modification, If possible I prefer via ODB updates and necessary is functionality of remove SCR (Urea) alerts.

Cheapest Solution:

Buy yourself a Ktag clone from China and solve your problem !!

Ktag clone is fine, I did Read and write a edc17c60, 308 2015.
Using ktag, clone.
It works fine, it whas listed under citr cactus.

Which version of ktag clone to use ?

KTAG V7.020 Firmware V2.25 red pcb.
Obdexpress.co.uk , always good service

Source:http://blog.obdexpress.co.uk/2019/06/15/ktag-clone-for-edc17c60/

KESS V4.036, VS V5.017 VS KTAG 7.020?

Obd2eshop will show you the difference between Red and Green KESS 5.017,  KESS V4.036 and KESS V5.017, KESS 5.017 and KTAG 7.020 in this post.

What’s the Difference Between Red and Green KESS 5.017?

1). The Green One and Red One have Same function. But Red KESS 5.017 is more close to The original KESS.
2).  Appearance of red kess is different from the green one. \

What’s the difference between KESS V4.036 and KESS V5.017?

1) KESS V5.017 support car/truck/tractor/Bike. KESS V5.017 supports both 12V and 24V vehicles. KESS V5.017 can support newer vehicles.
2) KESS V5.017 is 100% no tokens limited for all compatible vehicles. You can use it in anytime.
3) KESS V5.017 is fully open to all protocols such as EDC17/k-line/DSG/DQ200 DQ250 DQ500 Gearbox/ST10........, No Grey protocols anymore.
4) KESS 5.017 read and write ECU via OBD easily, Do not need to disassemble ECU.
5) KESS 5.017 software is very easy to install, just click: Next Step, then it can works well.
6) KESS 5.017 can connect internet ! Support Online Operation!
7) KESS 5.017 support more 140 protocols than KESS V4.036.

What’s the difference between KESS 5.017 and KTAG 7.020?

If you mainly want to work for 24V truck and tractor , Ktag V7.020 is more suitable for you.

1. Different Connection Way :

For Most Vehicles, KESS V5.017 can read and write ECU via OBD2 Cable Directly, Easy To Operate !
KTAG V7.020 read and write ECU via TRICORE or BDM Or Other Mode with special cable, But the software will guide you how to operate.

2. Different Vehicle Coverage :

For example: KESS 5.017 and Ktag v7.020 all can work For Most for Toyota Denso ECU Protocol,
But just K-TAG 7.020 can work For Toyota Hilux kun26 very well !


http://blog.obd2eshop.com/kess-v4-036-v5-017-vs-ktag-7-020/

2019 KTAG Firmware 8.000 Added 111 New Protocols

Look here: KTAG Firmware 8.000 added 111 new protocols and updated 313 protocols:
https://mega.nz/#!kF5ARCKS!AvssPDpFZLym6cV2JQapn5Be5QJcXkihKN3WvuwmxrU


Ktag 8.000 111 new protocols:


Note that, ktag 8.000 is not released at obdexpress.co.uk yet
You'd advised to use Ktag 7.020 with security and relief.


http://blog.obdexpress.co.uk/2019/05/14/ktag-firmware-8-000-added-111-new-protocols/