Which Tool Or Software Can Remove PDF, EGR, Adblue,NOX?

If you are looking for a recommendation for an OBD tool and software for removing or modifying files on most makes and models. Please read this article.

As I know you need more than one tool:

About 90% of people are using clone or reworked tools like kess or mpps.

You need more than one tool:
Hardware: Kess + Ktag for reading/writing
Software: Winols /ECM TITANIUM for modifying files (if you know the maps of it).

If will be for yourself use kess ktag clone is the best option.

the mpps is good but not in all cases . Mpps i think is more fastes . But kess have more ecu`s . For dpf egr etc. you can use ADS DPF, EGR remover but not all solution are good . You need to learn Winols.

For kess, KESS V5.017 No Token RED PCB. it is a clone but is very good.

Read this article: Best ECU programmer China Clone buying guide.

This article is trying to talk about the best ECU programmers China Clone incl. Ktag running ksuite, Kess V2 master running ksuite, FGtech Gallote V54, MPPS V18, renolink Renault ECU programmer etc.

Read this article: Clone Kess 5.017 Ksuite 2.47 review

One more helpful article: all ECU programmer China Clone software download

Hope it helps.

http://blog.obdexpress.co.uk/2019/09/17/an-obd-tool-and-software-for-removing-dpfegradblue-nox/

Ktag clone is the cheapest solution for EDC17C60 modification

Car ECU model:

Peugeot Partner 1.6 BlueHDI 2015 with EDC17C60

Purpose:

For modification, If possible I prefer via ODB updates and necessary is functionality of remove SCR (Urea) alerts.

Cheapest Solution:

Buy yourself a Ktag clone from China and solve your problem !!

Ktag clone is fine, I did Read and write a edc17c60, 308 2015.
Using ktag, clone.
It works fine, it whas listed under citr cactus.

Which version of ktag clone to use ?

KTAG V7.020 Firmware V2.25 red pcb.
Obdexpress.co.uk , always good service

Source:http://blog.obdexpress.co.uk/2019/06/15/ktag-clone-for-edc17c60/

KESS V4.036, VS V5.017 VS KTAG 7.020?

Obd2eshop will show you the difference between Red and Green KESS 5.017,  KESS V4.036 and KESS V5.017, KESS 5.017 and KTAG 7.020 in this post.

What’s the Difference Between Red and Green KESS 5.017?

1). The Green One and Red One have Same function. But Red KESS 5.017 is more close to The original KESS.
2).  Appearance of red kess is different from the green one. \

What’s the difference between KESS V4.036 and KESS V5.017?

1) KESS V5.017 support car/truck/tractor/Bike. KESS V5.017 supports both 12V and 24V vehicles. KESS V5.017 can support newer vehicles.
2) KESS V5.017 is 100% no tokens limited for all compatible vehicles. You can use it in anytime.
3) KESS V5.017 is fully open to all protocols such as EDC17/k-line/DSG/DQ200 DQ250 DQ500 Gearbox/ST10........, No Grey protocols anymore.
4) KESS 5.017 read and write ECU via OBD easily, Do not need to disassemble ECU.
5) KESS 5.017 software is very easy to install, just click: Next Step, then it can works well.
6) KESS 5.017 can connect internet ! Support Online Operation!
7) KESS 5.017 support more 140 protocols than KESS V4.036.

What’s the difference between KESS 5.017 and KTAG 7.020?

If you mainly want to work for 24V truck and tractor , Ktag V7.020 is more suitable for you.

1. Different Connection Way :

For Most Vehicles, KESS V5.017 can read and write ECU via OBD2 Cable Directly, Easy To Operate !
KTAG V7.020 read and write ECU via TRICORE or BDM Or Other Mode with special cable, But the software will guide you how to operate.

2. Different Vehicle Coverage :

For example: KESS 5.017 and Ktag v7.020 all can work For Most for Toyota Denso ECU Protocol,
But just K-TAG 7.020 can work For Toyota Hilux kun26 very well !


http://blog.obd2eshop.com/kess-v4-036-v5-017-vs-ktag-7-020/

BMW EDC17 done with KTAG Bootmode

I have the TPROT Level of this file from BMW X1 E84 10.2009.

I have attached Readout from kess ECU chip tunning.

https://mega.nz/#!UEhkmQRD!iaoRDQDNdcTCcWw50AlwQbFbF6erFofb1-fsQsN5jvI

Job done , with KTAG Bootmode and ONLY BOOTMODE.

some list save/dont touch by OBD

BMW EDC17
OBD2 SAFE 1037-
• 390654
• 390655
• 390656
• 390657
• 391386
• 391387
• 391388
• 393182
• 394078
• 394079
• 394080
• 395777
• 395779
• 396560
• 396562
• 396563
• 396565
• 500771
• 500772
• 507452
• 509475
• 509476
BMW EDC17
BOOT ONLY 1037-
• 389229
• 389230
• 391389
• 392383
• 395774
• 395778
• 396564
• 396567
• 397454
• 397572
• 399762
• 399763
• 399764
• 399768
• 400488
• 500770
• 501603
• 501612
• 501613
• 501614
• 502660
• 504248
• 504297
• 504298
• 504299
• 504976
• 504977
• 506047
• 507434
• 507435
• 507446
• 507449
• 507450
• 507451
• 507453
• 509478
• 509479
• 513572
• 513573
• 513581
• 513582
• 514074
• 515065
• 515070
• 515071
• 517681
• 517682
• 518559
• 522657
• 525082

Thanks.

www.obdexpress.co.uk

Who Like This Article Also Viewed:

MPPS V18 vs KESS V2 vs KTAG vs FgTech Galletto v54 (3)

Free Download Ksuite 2.08 & Reset Ktag + Kess V2 (3)

PCR2.1 Full Flash with Ktag and SSM cable (3)

Pinout KTag SSM Cable 144300T111 for PCR2.1 Read/Write (3)

How to open ECU Bosch MED17 to read with Ktag/Kess (3)

OEM Orange5 ECU immo list, car list, adapters, configuration, feedback

Free download OEM Orange5 immo list, carlist, adapters, configuration, feedback on what can work (most user feedback they pay what it can do).

OEM Orange5 immo list free download:

http://www.obdexpress.co.uk/upload/pro/orange-5-immo-list.pdf

OEM Orange5 chip list free download:

http://www.obdexpress.co.uk/upload/pro/orange-5-chip-list.pdf

OEM Orange5 feedback:

1. Orange 5 clone read and write eproms 95640 and 95P08C3 in circuit no problem with no errors, but I had to make sure that my connections to the chip via test clip were all good and then tool work like charm.

2. I have it for a long time and for now everything is working properly.
   One of the few clones that works well and works as an original.
   Some adapters are not supplied and must be purchased separately.

3. Adapters should be resolder for sure but it isn’t so bad ,at all
   The main point orange 5 clone isn’t so bad as clones can be.
   Good investment for sure .

4. So far its reading and writing (with verify) all eeproms i try. Good tool so far.

5. I like PIN checking function (test insertions) very much .It saved my job a lot of time.
   In combination with my UPA -S ,carprog ,and TL866 a lot of job can be done successfully .

6. Great programmer. All that is stated works. If the speed of exchange is not important, you can do a lot. Many good calculators.

7. 93c66,46,56, 24c02,04
   S190, hc08(1j35d)ss read eeprom and flash
   Hc05x32 ss and read all went good.

8. I buy Orange5 china clone. Work great. Now I check in hc05b8, hc11e9, and eeproms. All read and write very fast.

9. This is my test report:

9. This Orange5 is clone but includes IMMO HPX 9V0 Software License and adapter set, it works good for me with hundreds dollar compared with the original thousands dollar. I just read 1d69j adapter success.
10. First very easy to install, then I start tested it: all functions open 1-10 except car radio get error, tested reading usual EPROMS all good, tested tms370 with adaptor board did not read so maybe bad adaptor board, tested IMMO login code from dump, TMS VW works.
11. IMMO SW included and also activation for other sw. Only one minus is not have updates , I have original also get this to play with it , and can’t say bad for it , till now first I read with original after that with the clone and no problem till now , of course I not test all but with some NEC all ok .
12. I have never had any problems with the clone; everything works as it should, knock on wood. Not sure is there any script but software for IMMO, radio and dash coming together with clone. 2j74y ok, 35080 ok, TMS IMMO Opel ok, Hc05 IMMO old VW ok
13. Orange 5 OEM seems to be an EEPROM programmer. I often extract the dump of an EEPROM with a programmer and modify it with the software came with the Orange 5.
14. Work great. Now I check in hc05b8, hc11e9 EEPROMs. All read and write very fast.
15. I have Orange5 programmer OEM clone and everything works perfect for now. I have 4 secured MCU, and they work ok. On Hc908az60 secured it work’s good. I have tried 68hc11 and it work’s just perfect.
    I have tested with 1j35d, 4j74y, 1d69j, 0d69j, 0f82b, 3k91d, TMS 370c702 OK!
16. I bought a clone orange 5 because original took a shit. We need put remote data up for all Chrysler keys and anything that uses 7941 to make orange immo reset more usefull. Have been logging out put of orange and mk3. Thought about making a device but by time done mk3 clones will be out. tnt enforcer opens up tm100 soft that needs paid for and alot of mk3’s software options. Hey why unpack exe go through all the hassle, just run xp and tntenforcer.
17. I read HC05x32 with O5 clone success, when you want to be 100% sure, better to resolder all point on them.
    Or maybe the problem is in the voltage, that sometimes it loses, first to make BOOT, and when of OK then to read, if you change manual of a value smaller to 5v to read to 5v down to the right, this error tries, also When you do a bad reading the info of the MCU modifies it to you, be careful to read an original MCU or it will be damaged.
18. I read nec with orange clone . no problem.
19. Mine is clone and work very well, EZS HC05 on adapter, Nats BDM, 307, 206 BSI BDM ……
    But before using, need rework on all solder joint and cleaning all adapter…..
20. It made this adapter to working with Nissan NATS, tested NATS 4 easy work, not have NATS 5 for test yet.
    If you want to make this adaptor and you need the pinout like in picture.
    Here it is. All in one page for easiest working on bench.

9. Orange 5 clone need reverse TX and RX.

22. Orange5 is a learning tool at the moment I’m reverse engineering it.

OEM Orange5 adapters (21 pieces in total)

Orange-5 programmer	1
USBcable	1
Adapter:
Incircuit wire	10
SOIC8/DIP8 Expert adapter	1
SOIC8/DIP8 adapter	1
SOIC8_14_93Cxx adapter	1
SSOP8/DIP8	1
Lead with clips SOIC8 & DIP8	1
Adapter 05L28/05B	1
Adapter 908AS60/AZ60 QFP64	1
Adapter 68HC(7)05P3/E6	1
Adapter 05B/X_705B/X QFP64 V2	1
Adapter 11PA8/11E9 QFP64	1
Adapter 68HC05H12	1
Adapter 68HC11EA9	1
Adapter 908AS60	1
Adapter 9S12Dxx	1
Adapter 912Dxx	1
Adapter 9S12X	1
Adapter 912B32 QFP80	1
Adapter 68HC11F1	1
Adapter 68HC11L6	1
Adapter 68HC11KA4	1
Lead 11E9(20) with power	1
Lead for EWS3 mask 0D46J	1
Adapter TMS374C003A	1
Adapter MSP430F	1
Adapter 68HC11KA4 PLCC68	1
Adapter 908JL	1
Adapter PCF7941	1
Adapter 9S12XE	1
Additional software:
Immo HPX 9V0	ok
NEC V850ES/SJ3 V850ES/SG3 UART	ok
NEC V850E2 NEW	ok
Software Licenses:
MTRK (Included in Orange-5 base)	ok
TMS (Included in Orange-5 base)	ok
M08V NEW	ok

 http://blog.obdexpress.co.uk/2019/01/30/oem-orange5-immo-list-car-list-feedback/