Here is my experience of how to use ktag sw 2.13 hw 6.070 internet connection solution
I´m posting the solution to solve all grey in ktag 6.070 coz network connection is not allowed to use with Ktag programmers except Ktag 7.020.
1 install ksuite 2.08
2 download the file
3 the file have 3 parts (sd card, update too ksuite, nxp bin if necessary)
4 put the file update in the past off ksuite 2.08
5 use new sd card ( in my case the old one doesn't work )
6 copy the file to sd card
7 open ksuite the ksuite update auto
1 install ksuite 2.08
2 download the file
3 the file have 3 parts (sd card, update too ksuite, nxp bin if necessary)
4 put the file update in the past off ksuite 2.08
5 use new sd card ( in my case the old one doesn't work )
6 copy the file to sd card
7 open ksuite the ksuite update auto
If works after install the ksuite that you want, if doesn't work you have to re-flash the nxp the file is there for me was not necessary
Don't use the internet like me when the tool is connected
If the link doesn’t work you can ask O.P. for help:
This information is not mine, is work off some search in forum and help off some users. It’s never been verified with professionals.
So if you wan use a ECU programmer via Internet, you’d better go to Kess V2 5.017 or Ktag 7.020. Both has been tested (by experts) no issues when used with network connection.
Src:
No comments:
Post a Comment