MPPS V18 Windows 7 Reviews: Did all cars no problem!

I have a MPPS v18 Chinese cheap clone and it works fine.

It works with Windows 7

  

I have seen some talk about MPPS pcb (different colours) and tried to find out whats the different between eu or china tool.

Personally, the color of the pcb plays no role at all. A red car is also not necessarily faster than a black car.The color of the board could also be an advertising gag, so vendors can sell things just at another price. The colour of the board makes no direct difference, that’s missing the point. It simply points out that it is that type of euro clone, kinda like a trade mark

I’m using it to save Kess tokens.

So far….its worked on everything l have tested on.

edc16 obd ‘renaults’ tricore pcr2.1ok

edc17c10 ok

boot volvo edc17cp22 ok
marelli 6o2 multi k-line ok

and some others. ok
I did all cars no problem. It can even write full flash to EDC1616 Opel

It’s reading my alfa romeo EDC16C39

Source:http://blog.obdexpress.co.uk/2017/06/23/mpps-v18-win7-reviews-did-all-cars-no-problem/

www.hobdii.com

Xprog 5.70/5.60 read Infineon XC2336A-56F80L-AA New Ford Ka

Finally, i did xc2336A-56F-80L processor perfectly with a Xprog programmer. And here is my write-up. Wish it helps.

For XC2336A-56F80L-AA from NEW FORD KA

You need to buy Infineon authorization.

It’s only available in Xprog box 5.70 and Xprog 5.60

  

To read use 3 wires from 10 pads connections (tatyanka privetik) and other wires directly to pins.

You must select XC2336A-72 in Xprog, is the same , only flash1 changes the size.

Source:http://blog.obdexpress.co.uk/2017/06/22/xprog-readinfineon-xc2336a-56f80l-aa-new-ford-ka/




www.hobdii.com

Ktag firmware 7.020 read Toyota 76FXXX ECU

K-tag firmware 7.020 Ksuite 2.23 car list adds NBD 76F00XX Toyota ECU support.

This is v2.23 ktag fw 7.020 reading Toyota 76F00XX

ktag v7.020 price: €349-€389

  

Ktag fw 7.020 car list:

http://www.obdexpress.co.uk/upload/pro/ktm100-ktag-vehicle-list.pdf

Ktag 7.020 green PCB:

http://www.obdexpress.co.uk/wholesale/V7.020-ktag-ktm-ecu-programming-tool.html

Ktag v7.020 blue PCB:

http://www.obdexpress.co.uk/wholesale/v7.020-ktag-ecu-programming-tool.html

Ktag firmware 7.020 version 1 or version 2:

http://blog.obdexpress.co.uk/2017/06/15/where-to-buy-hq-ktag-firmware-7-020/

ktag firmware 7.020 test report & car list:

http://blog.obdexpress.co.uk/2017/06/16/ktag-7-020-ksuite-2-23-ecus-of-car-truck-moto-tractor-boat/

Ktag fw 7.020 reviews:

http://blog.obdexpress.co.uk/2017/06/15/ktag-ktm100-firmware-7-020-7-003-reviews/

V2.23 Ktag firmware 7.020 Tested 100% OK

This is the Ktag firmware 7.020 test report. Here you go. Ktag firmware 7.020, how to use for car, truck, moto, tractor, boat ECU reading/writing...

Ktag firmware 7.020 how much do you know?

1- More languages available

KTAG fw 7.003: English, Italian, Portuguese

KTAG fw 7.020: English, Italian, Portuguese, French, Deutsch, Spanish

2- More ECUs and cars can be tested with

KTAG fw 7.020 adds 100+ ECU types and supports new car models e.g. Toyota 76FXXX, PSA 17.4.4, Ford E83, VW 17.5.5 (1766), Mercedes-Benz 276 ECU, Toyota 76F, etc.

3- Better wiring description

Ktag master V7.020 displays diagrams in words, not pictures

4- Runs faster and more stable

The important note- there are two versions of Ktag firmware 7.020 with different PCB design:

Version 1: Ktag firmware 7.020 with item no.SE135

 

(HOT) Version 2: Ktag firmware 7.020 with item no.SE135-B

 

Ktag firmware 7.020 not only differs from PCB design but also ktag software installation.

Ktag firmware 7.020 reads/writes a car ECU:

      

V2.23 ktag fw 7.020 diagnoses a motorcycle

 

ktag fw 7.020 works no issues on a truck ECU R/W

 

K-tag firmware v7.020 works ok on a tractor

 

Ktag 7.020 ksuite 2.23 diagnoses on a boat

 

Ktag firmware 7.020 review:

http://blog.obdexpress.co.uk/2017/06/15/ktag-ktm100-firmware-7-020-7-003-reviews/

Where to buy HQ Ktag firmware 7.020? (PCB attached)

There are two versions of Ktag KTM100 firmware 7.020 china clone available in the market. Both works good? Download Ktag 7.020 PCB and will get the answer from it.

Version 1: Ktag firmware 7.020 with item no.SE135

 

Version 2: Ktag firmware 7.020 with item no.SE135-B

 

Actually, there is no much difference between Ktag 7.020 version 1 and version 2 except the PCB design, said the vendor.

Why do you need Ktag fw 7.020?

1- More languages available

KTAG fw 7.003: English, Italian, Portuguese

KTAG fw 7.020: English, Italian, Portuguese, French, Deutsch, Spanish

2- More ECUs and cars can be tested with

KTAG fw 7.020 adds 100+ ECU types and supports new car models e.g. Toyota 76FXXX, PSA 17.4.4, Ford E83, VW 17.5.5 (1766), Mercedes-Benz 276 ECU, Toyota 76F, etc.

  

3- Better wiring description

Ktag master V7.020 displays diagrams in words, not pictures

 

4- Runs faster and more stable

Source:http://blog.obdexpress.co.uk/2017/06/15/where-to-buy-hq-ktag-firmware-7-020/

Ktag KTM100 V7 Review

Ktag firmware 7.020 reviews & K-tag KTM100 firmware 7.003 reviews... here you go.

Interface Tested. It works great.
Made a 116d F20 successfully. Good job !

KTM100 is just 6.070 firmware transferred to trasdata which is equivalent to 7.003 on KTM100

Ktm 100 100% Working on Bmw F31 335Xdrive, i have ever tried it. Working!!.

tricore boot mode ktm100 test read ok
test ecu med17.1.1 audi a8 v8 2012ywriting : no
ecu clon no

ktm100 can make edc17c64. where to find fake firmware v7.003 to upgrade v6.070, then there is posible to make edc17c64 on eu clones.

ktag and dimsport ktm100 is the same hardware with separate software.

There is no Update from version 6.070 to 7.003, because Board is different, Board is from Dim Sport, and Software too.

read and write without problem, i can not believe there, but there is true.

My friend have Ktag v7.003 clone and he made edc17c64 without problem.

I try it with edc17c64; reading ok,writing ok

Just received the Ktag fw 7.020, saying it’s the newest ktag china clone and supports more ECUs like Toyota 76FXXX, PSA 17.4.4, Ford E83, VW 17.5.5 (1766), Mercedes-Benz 276ECU, Toyota 76F, etc. I will try it tomorrow and report here.

I confirmed my ktag 7.020 good... works with cars, motorcycles and trucks.

Better PCB than ever before

 

http://blog.obdexpress.co.uk/2017/06/15/ktag-ktm100-firmware-7-020-7-003-reviews/

(solved) KTAG KTM100 v7.003 Error [e000079] customer code invalid

All tips here for KTAG KTM100 DIMSPORT firmware V7.003 with "interface connected. Error: [e000079] customer code invalid."

what to do....

There are 3 possible reasons:

1. You got to internet connection
2. You didn't install successfully Ktag driver
3. You have no power supply fed to the Ktag ecu programmer
4. You have poor connection between the TF card and Shrapnel

Working Solution:

1. Please disable internet/network connection before installing software. THIS IS VERY IMPORTANT!!!
2. Ensure KTM100 driver is well installed.

Open My Computer>>Manager>>Device Manager>>Universal Serial Bus

controllers>>DimSport-New Trasdata Device to check the good communication between K-tag and computer.

3. Make sure there is a power supply fed to the KTM100 ECU tuning kit.

4. the problem not solved yet? Check whether the shrapnel firmly attached to the TF card.

Ps. BIG THANKS to the http://blog.obdexpress.co.uk/

http://www.hobdii.com/

Ktag KTM100 change/add a language manually

This is how to change or add a language manually to KTAG KTM100 firmware v7.003 / v7.020.

Part 1: To covert the KTM100 language:

Go to INI settings file and change manually to English!
see whats the default language that’s written in file, delete and write English

• ini = english

Or go to Options in KTM100 interface

Select the language you want to convert

Ktag KTM100 firmware 7.003 languages: English Italian Portuguese

Part 2: To add a new language to KTAG KTM100

Anyone can add a new language to KTM100 interface if you have the language pack. But try on your own risk!

If you need K-TAG KTM100 available in more language: Italian Deutsch English French Portuguese Spanish, you can go toKTAG firmware 7.020: http://www.obdexpress.co.uk/wholesale/v7.020-ktag-ecu-programming-tool.html

 

The factory has improved and added new language packs.

So, Ktag 7.020 has more languages can be chosen compared with Ktag firmware 7.003.

Source:http://blog.obdexpress.co.uk/2017/06/14/ktag-ktm100-changeadd-a-language/

http://www.hobdii.com/

Xprog m Reads BMW CAS2 mc9s12dg256c: OK

This is how to use Xprog programmer to read BMW CAS2 mc9s12dg256c.

• BMW CAS2 mc9s12dg256c

Reads good with Xprog m.

Xprog 5.55 is ok but new Xprog 5.70 better i think.
Step 1: Xrpog > Device > MCU/MPU > Freescale HC(s)2-secured > MC9S12-EEPROM-secured (at very bottom)

Step 2: Xprog > File >New Bin File.
Step 3: Xprog > Run > Read
  

PS: You may want to take a little more care with your connections. Cas is easy to kill. Your Vdd and BKGD looks to be bridging.

http://www.hobdii.com/

Update Ktag V7.003 to Ktag V7.020: new encrypted cars & 100+ ECUs

obdexpress.co.uk rolls out newest 2017 Ktag Master FW V7.020 SW V2.23 ECU programming tool, it adds many newencrypted new car models works I.E Toyota 76FXXX, PSA 17.4.4, Ford E83, VW 17.5.5 (1766), Mercedes-Benz 276ECU, Toyota 76F, etc. as well as 100+ ECU types.

So if you had the old firmware Ktag KTM100 7.003 and want to update to firmware 7.020, you could ship the full package back to rework (Cost 140USD, not including shipping)
Ktag Master FW V7.20 for sale: 425 USD (389EURO)

How to install Ktag Master FW V7.20?

Hardware version: V7.020

Software version: V2.23

– XP works fine, try on WIN7 8 10 at your own risk

– How to install ksuite v2.33( applies for ksuite v2.23):

During installation, you are able to choose language: English, Italian, Portuguese

Using tips:

Tip 1: During operation, disable the internet connection; otherwise the ktag software may get damaged. (There are warning mark at the back of machine)

Tip 2: You may notice Ktag master V7.020 connection instructions is words not pictures, actually, you will find some words are blue or red color with underline, click them and you will see the connection instructions has pictures. Here two pictures for example.

 

Ktag Master V7.020 has no tokens limit.

It is easy to reset tokens:

When you run out of the tokens, plug the USB cable into the computer and the red indicator flashes, press the Reset button, wait until the indicator flashes off, unplug the USB cable and plug back to the computer, OK now you have another 30 tokens.

ktag master V7.020 outlook is same as Ktag V7.003:

  

 Source:http://blog.obdexpress.co.uk/2017/06/09/ktag-v7-020-new-encrypted-cars-100-ecus/