Wednesday, January 27, 2016

Solution of KESS V2 Renew Error

Problem:
Renew Kess V2 Error
Solution:
Please rename the tokens file,
Change the name token1.tok to token3.tok or token5.tok.
Then copy the token file to the folder of the tokens file.
Make sure it exist only one token.tok file in the folder.


Kess V2 Using Tips
1. No internet and must follow the steps from our video (Once connected to internet will destroy  the hardware and can not repair in your place, you need to send back for repairing.)
2. No update and no anti-virus software on computer
3. Dont change CPU
4. Can not programm CPU
5. Suggest using our XP system. If you want test other system,no internet also.Or be responsible by yourself.

Thursday, January 14, 2016

V2.08/V2.15 Truck Version KESS V2 Firmware V4.024 Released

V2.08/V2.15 Truck Version KESS V2 Firmware V4.024 Manager Tuning Kit Master Version newly released in obdexpress.co.uk.

Software version: V2.15/V2.08(V2.08 can be used with internet, V2.15 can not use internet)

Hardware version: V4.024

Multi-Language: English, German, Spanish, Italian, Portuguese, French

Tokens:
It comes with about 30 tokens. When token run over, you need to buy new token chips for KESS V2 Truck version item number SO242-C. This chips has already programed with tokens program. You can directly replace this chip to the old one and use. No need to use J-LINK8 to add tokens again.

Other KESS V2 is not good at trucks. This one is the truck spelized version. Compared with others, new adds a lot ECUs for trucks.

Click here to know KESS V2 truck supported list and comparison with other KESS
Truck Version KESS V2 V4.024 Display:


Tips on using Truck version Kess V2:
1.When you using V2.15 KESS V2, please make sure your computer do not have internet. This is very important, connect to internet may damage the hardware and can not repair in your side, you must send back to us for repair.
2. We recommend you use V2.08 software. And must use the V2.08 software we provide, not download from internet.
3. Truck Version Kess V2 SW V2.08 FW V4.024 supportS more Cars/Trucks models and workS more stable than other version of Kess v2 does.

Monday, January 11, 2016

Kess V2 V2.13 Firmware 4.036 Reset Tokens Guide

Kess V2 V2.13 Firmware V4.036 ECU programming tool token reset error solution and add token instruction are provided in the text below.

Problem before entering:
One of the KESS V2 V2.13 FW V4.036 users tried to add token himself when he has only 9 tokens left. But the Kess reported and error:
“Ecu-Tunners V2.4

Unhandled exception has occurred in your application. If you are click Continue…the application will close immediately. “”

Then the Kess v2 ksuite V2.13 software was downgraded to V2.08.
Error screenshots token below:


Kess v2 firmware V4.036 ECU tuning kit comes with no token limitation. Here is the step-by-step token reset procedure.

Free download token reset video, Ksuite-tokens.zip and Kessv2-TF.zip
https://mega.co.nz/#fm/25UkmDoY

Detail instructions:
Disclaimer: Better to refer to the video instruction first.

How to connect Kess V2 programmer to reset tokens?
Follow connection picture below:
DO NOT connect KESS V2 device with vehicle.
Please disable both local area connection and wireless network connection, otherwise KESS v2 ECU programmer device the will damaged.
Well installed KESS V2 Ksuite V2.13 software
Open My Computer>>Device Manager>>Universal Serial Bus Controller>> USB Device to check if the KESS V2 Ksuite v2.13 is well installed
Unzip Tool.zip file and copy all 3 files to the desktop
Copy and cut KSuite-tokens.zip file to Local Disk C://, unzip the file
Delete “Tool” folder and zip.file on the desktop

Open Ksuite software on the desktop then close it
Rename “Token1tok” on the desktop as “Token47tok”
Prepare a 2GB TF Card, format the card
Copy Kessv2-2.13-TF.zip file and copy files to the new TF card
Delete “Kessv2-2.13-TF.zip” file on the desktop
Replace the old TF with new one
Rename “Token47tok” on the desktop as “Token48tok”
Copy the “Token48tok” to “Tokens” folder
Delete KSuite-tokens folder on Disk C://
Unzip the KSuite-tokens.zip file again
Open the unzipped folder, rename “K10033818.CFG” to “139K10033818.CFG”
Copy the file to “KSuite” >> “Update” folder
Run “K10033818 K2-TR ECU TUNERS”;
Click “OK” to continue;
Browse the folder to C:\\KSuite tokens\KSuite;
Press “Reset Tokens Count” button
Press “OK” to reset tokens
Open Ksuite software and wait for loading, then close the window

K-TAG KTM100 V2.13 firmware V7.003 Connection error E000079 (Fixed)

KTAG K-TAG KTM100 V2.13 firmware V7.003 ECU Programming Tool Master Version connection error (E000079) solution is provided below.

Problem:
After well installed the Ktag KTM100 V2.13 software on Win XP laptop and tried to select ECU to read and write. The software displays no ECU options under “Option” tab (all options are in gray). Meanwhile, the KTM100 software reported an error:
“Initialization…
Interface connected…
Firmware Version: v7.3 build:0000
Error 【E000079】Customer Code Invalid”
Possible reason & Solution:
Obd2express.co.uk engineer has worked out the solution and verified working by our customer.

Possible causes:
1.Internet connection have not been disabled
2.Ktag driver is not well installed
3.There is no power supply fed to the Ktag ecu programmer
4.TF card and Shrapnel has poor connection

Solution:
1.Please disable internet/network connection before installing software. THIS IS VERY IMPORTANT!!!

2. Make sure Ktag KTM100 driver is well installed.
Open My Computer>>Manager>>Device Manager>>Universal Serial Bus controllers>>DimSport-New Trasdata Device to check the good communication between K-tag and computer.

Software driver installation video to refer:
http://www.dailymotion.com/video/x2vd2al_fw-v7-003-ktag-k-tag-ktm100-v2-13-software-installation-video-obd2express-co-uk_auto?start=10

3.Make sure there is a power supply fed to the Ktag ECU tuning kit.

4.If all the previous conditions are no problem, then the problem lies on the TF card. Make the shrapnel firmly attached to the TF card.

In our customer’s case, the TF card is loose connection. He higher the shrapnel to make it firmly attached to the TF card, then the problem was solved.

K-TAG V2.13 KTM100 V7.003 failed to read EDC17 (fixed)

Here is the solution to KTAG K-TAG V2.13 KTM100 7.003 ECU Programming Tool Master Version “Error (E011024) CAN Communication error” when reading EDC17.

Problem:
KTAG KTM100 software reported CAN Communication error when read EDC17. Then another error displayed “This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem.” So he disconnect the current running FGTECH Galletto V54 ECU tuning software. Tried to uninstall KTM100 and communicate with other car models, still the same error displayed. (error screenshots)


Possible causes:
1.Anti-virus software or current running software
2.Operating system

Solution:
Ktag KTM100 7.003 does read EDC17. See “Reference”. But make sure you’ve done following settings.

1. Disconnect anti-virus software and other current existing/running software programs (fgtech etc)

2. Download our Windows XP (Win XP SP3 professional) operating system
http://www.chinaautodiag.com/download/ghost-windows-xp-professional-sp3-free-download.zip

How to install Win XP SP3?
http://www.chinaautodiag.com/download/How-to-install-ghost-windows-xp-professional-sp3.pdf

3. Disable both local and wireless network connection

4.Reinstall KTM100 V2.13 software and read ECU follow video instruction.
http://www.dailymotion.com/video/x2vd2al_fw-v7-003-ktag-k-tag-ktm100-v2-13-software-installation-video-obd2express-co-uk_auto

Reference:
KTAG KTM100 is the best K-tag ECU programmer version to read EDC 17.

KTM 2.13 adds more ECUs than other ordinary Ksuite software:
BMW:
EDC17C41 TC1797
       EDC17CP45 TC1797
       EDC17C50 TC1797
EDC17C56 TC1797
EDC17CP49 TC1797
MEVD172G TC1797
MEDV1725 TC1797
Public
EDC17C46 TC1797
       EDC17C44 TC1797
       MED17.1.6 TC1797
       MED17.5.21 TC1782
       MED17.5.5 TC1767
       ME17.5.24 TC1724
       MED17.1.1 TC1797
Volvo
       EDC17CP48 TC1797
 
Jaguar
MED17.8.31 TC1797
 
Opel
EDC17C59 TC1767
 
Run quickly
      EDC17C46 TC1797
      MED17.7.2 TC1797
      EDC17CP57 TC1793
      EDC17C66 TC1793
  Ford
      EDC17C10 TC1797
 
Ferrari
      MED17.3.4 TC1797
 
McLaren
      ME17.8.3 TC1797
 
Renault
      ME17.9.20 TC1782

You can also watch the video example (dailymotion video above) on installing KTM100 software on Win XP and programming VW Golf 6 2.0L 1.6V TDI EDC17 CP14 ECU.