Galletto V54 0475 is better than fgtech V54 0386: win7 works + more models

Newest FGTech Galletto V54 with serial number 0475 is much powerful than fgtech V54 with serial number 0386, it adds dozens of car models with checksum working great.

Why update FGTech Galletto V54 SN 0475 instead of old one with SN 0386?

1. I just checked it and 0475 is Euro version, better one than the 0386, but it has different hardware compare to 0386 (Chinese).
2. Reprogram to 0475 and then you can use better software and also windows 7/10 32/64 bit OS.
3. 0475 works well with Windows 7/10 32/64 bit OS.
4. All you who has date changing problems or dont work windows 7 or windows 10 OS, update your tool from 0386 to 0475. Then all these issues are gone!!!!

FGTech Galletto V54 SN 0475 new workable models that 0386 doesn’t have:

11/12 – OBD driver SSangyong Delphy DCM3.7 Read/Write, Checksum

11/12 – OBD driver for Ferrari 458 Italia MED9.6 Ecu Master and ECU Slave Read/Write, Checksum

10/12 – OBD driver for Fiat/Alfa/Lancia Twinair/Multiair 8GMF and 8GSF Read/Write, Checksum

10/12 – OBD driver for Mazda 5, Mazda 6 2.0 Diesel ECU RF8x Read/Write, Checksum

10/12 – OBD driver for Mazda 5, Mazda 6 2.0 Diesel ECU RF7x Read/Write, Checksum

09/12 – OBD driver for Simos 10.xx VAG 1.2 TSI Read/Write, Checksum

09/12 – OBD driver for CRD 3.xx Mercedes 2200 CDI Read/Write, Checksum

09/12 – Simos PCR2.1 VAG 1.6 TDI Unlock Boot Tool – Read/Write EEPROM

09/12 – OBD driver Simos PCR2.1 VAG 1.6 TDI Read/Write, Checksum

08/12 – RSA recognition Peugeot Bipper

08/12 – RSA recognition Citroen Nemo

08/12 – OBD driver Driver for writing Bosch EDC16C34/5 Peugeot Bipper Read/Write, Checksum

08/12 – OBD drive Driver for writing Bosch EDC16C34/5 Citroen Nemo  Read/Write, Checksum

07/12 – OBD driver Delphi DCM3.5 for Tata Safari  Read/Write, Checksum

07/12 – Checksum recognition for DCM3.7 Ssangyong

07/12 – Checksum recognition for DCM3.7 Opel and Saab

07/12 – Checksum recognition for DCM3.7 Kia  and Hyundai

07/12 – Boot Visteon ST10F275 RX-TX Mode

07/12 – Boot ME7.9.10 ST10F275 RX-TX Mode

06/12 – Checksum recognition for Denso Subaru Tribeca

06/12 – Boot Mitsubishi MH7203 Hyundai

06/12 – Checksum recognition for Denso Nissan L200

06/12 – Checksum recognition for Denso Nissan X-Trail

06/12 –  OBD driver Opel Simtec75 CAN  Read/Write, Checksum

05/12 – OBD driver  Porsche SDI3 CAN  Read/Write, Checksum

05/12 – Corvette Utility CAN for change VIN, Code Align, Erase Errors

05/12 – Corvette Utility VPN for change VIN, Code Align, Erase Errors

05/12 – OBD driver Renault SID305 CAN  Read/Write, Checksum

05/12 – OBD driver Maserati ME9 CAN  Read/Write, Checksum

04/12 – Tool Boot Hitaci Phase 3

04/12 – Tool Boot Hitaci Phase 2

04/12 – OBD driver Fiat ME17.31 CAN  Read/Write, Checksum

04/12 – Boot Mitsubishi for L200 MH8102F

03/12 – Boot Mitsubishi for Lancer EVO MH7202

03/12 – Fiat MJ8DF CAN Serial Injectors

03/12 – Fiat MJ8DF CAN Serial Injectors

02/12 – OBD driver Fiat MJ8DF CAN  Read/Write, Checksum

02/12 – OBD driver Fiat MJ8DF K-line  Read/Write, Checksum

02/12 – OBD driver Mercedes Delphi CRD2.xx CAN  Read/Write, Checksum

01/12 – OBD driver Ford Delphi DCM3.5 CAN Read/Write, Checksum

01/12 – OBD driver PSA Delphi DCM3.5 CAN  Read/Write, Checksum

01/12 – OBD driver VAG Simos 3xx Boot mode 29F400 C167 Read/Write, Checksum

12/11 – OBD driver VAG Simos 9.1 Boot mode 29F400 C167 Read/Write, Checksum

12/11 – OBD driver VAG Simos 7.1 Boot mode 29F400 C167 Read/Write, Checksum

12/11 – OBD driver VAG Simos 33 K-line serial Read/Write, Checksum

12/11 – OBD driver VAG Simos 32 K-line serial Read/Write, Checksum

12/11 – OBD driver VAG Simos 3PG K-line serial Read/Write, Checksum

12/11 – OBD driver VAG Simos 3PE K-line serial Read/Write, Checksum

12/11 – OBD driver VAG Simos 3PD K-line serial Read/Write, Checksum

12/11 – OBD driver VAG Simos 3PC K-line serial Read/Write, Checksum

12/11 – OBD driver VAG Simos 3PA K-line serial Read/Write, Checksum

12/11 – OBD driver VAG Simos 9.1 K-line Read/Write, Checksum

11/11 – JTAG MPC55xx

10/11 – New password Tricore Tprot V08-10

10/11 –  OBD driver Renault Valeo V40, Read/Write, Checksum

10/11 – AUD Renesas

For the old Fgtech V54 with serial number 0386, it was already tested working fine with many car models & ECU types.

old Fgtech V54 reviews

Where to have FGTech Galletto V54 with serial number 0475?

It can’t be more better than www.obdexpress.co.uk with helpful and kind customer service and after-sale service.

Mercedes ME9.7 Engine ECU broken, new ECU & Ktag will do the job

Mercedes ME9.7 ECU ECM Engine get broken or you are considering to replace a used ECM, then you need a brand new ECM to contain new data, and also a Ktag / KTM100 to read/ Write ECU data, also a Special renew cable to make the reading job easier instead of dismantling the ECU.

Here we go for what needs and how to do step by step.

Need:

1. Brand new Mercedes ME9.7 ECU ECM Engine.

Attach images from outside and inside

1) Has a wide Mercedes coverage incl. C series, E series, CLK cars, CLS sports cars, S Series, M Series, R Series, GLK cars etc.

2) Compatible with all series of 237 engine 4.6L 4633CC V8/ 5.5L5641CC V8

3) Can unlock an used ME9.7 ECM in order to adapt it with SDS, Autologic etc.

4) can directly install into the car and use MB star C4 /C5 to perform online programming.

5) Can perform renewing ECU repeatedly with a renew cable instead of dismantling the shell.

image 2: Mercedes Benz ECU ME9.7/272-273/ Renew Cable

If the original ECU is not broken, this renew cable can be connected to the ECU to read out the data with Ktag, then write into the new Mercedes ME9.7 ECU.

2. Ktag V7.020 / KTM100:

After the original ECU data is read out, you can use the Mercedes ECU ME9.7/272/273/ renew cable to connect KTM100 or KTAG

to write the new ECU data into the new Mercedes ME9.7 ME 9.7 ECU ECM Engine instead of dismantling the new ECU.

This Mercedes ME9.7 renew cable is tested 100% ok on the following two Ktag cables:

Ktag V7.020 with 4 led indicators (Red PCB)

Ktag V7.020 (Red PCB)

How to do?

Step 1:

Read out the original Mercedes ME9.7 ECU data with KTAG.

Here a procedure you can follow: https://www.obdexpress.co.uk/service/fw670-ktag-v213-technical-support-12459.html

***Now, don’t forget the above-mentioned renew cable, with it you don’t need to dismantle the ECU.

Step 2:

Install the brand new Mercedes ME9.7 ECU ECM Engine.

Step 3:

Write the original ME9.7 ECM data into the brand new ECM with the help of Ktag / KTM100.

That’s all

Thanks!

http://blog.obdexpress.co.uk/2018/12/11/how-to-replace-broken-mercedes-me9-7-ecu-ecm-engine/

How does Ktag KTM100 work with Mercedes ME9.7 ECU and Renew Cable?

After the original Mercedes ME9.7 ECU engine get broken, what you need to do is have one brand new ECU, a ECU programmer like KTAG V7.020/ KTM100 to read and write the ECU data, also one special cable to make the work easy without dismantling the ECU.

Therefore you need:

1. Ktag V7.020 / KTM100: can read out the Mercedes ME9.7 ECU data from the original one and write it into the new ECU.

2. Brand new Mercedes ME9.7 ECU ECM Engine.

3. Mercedes Benz ECU ME9.7/272-273/ Renew Cable

Because the new Mercedes ME9.7 ECU ECM Engine supports online programming, renewing ECU repeatedly with a special cable instead of dismantling the shell, this special cable is the this renew cable I mentioned.

Detailed Information:

1. Mercedes ME9.7 ME 9.7 ECU ECM Engine Computer Programming Meanwhile Compatible with All Series of 237 Engine 4.6L 4633CC V8/5.5L5641CC V8

Mercedes ME9.7 ME 9.7 ECU ECM Engine Computer Compatible with Follow Vehicle models:

Series	Models	Chassis NO	Engine Model（ME9.7）
C Series	C230	203.052	272.920
C Series	C280	203.054	272.940
C Series	C280	204.054	272.947
E Series	E350	211.056	272.964
E Series	E280	211.054	272.943
E Series	E300	12.054	272.952
E Series	E350	207.356	272.961
CLK cars	CLK280	209.354	272.940
CLK cars	CLK350	209.356	272.960
CLS sports cars	CLS350	219.356	272.964
CLS sports cars	CLS300	219.354	272.943
SLK sports cars	SLK280	171.454	272.942
SLK sports cars	SLK350	171.456	272.963
S Series	S350	221.56	272.965
S Series	S4100	221.195	272.974
M Series	ML350	164.186	272.967
M Series	ML300	164.182	272.945
R Series	R350	251.165	272.967
R Series	R300	251.154	272.945
GLK cars	GLK300	204.981	272.984
GLK cars	GLK350	204.987	272.971

Meanwhile, compatible with all series of 237 engine 4.6L 4633CC V8/ 5.5L5641CC V8
Support online programming, renewing ECU repeatedly with a special cable instead of dismantling the shell


2. Mercedes Benz ECU ME9.7/272-273/ Renew Cable

How to use:
After the original ECU data is read out, you can use the Mercedes Benz ECU ME9.7/272/273/ renew cable to connect KTM100 or KTAG to write the new ECU data into the new Mercedes ME9.7 ME 9.7 ECU ECM Engine, instead of dismantling the new ECU to write the data.
3. Ktag V7.020
New Mercedes ME9.7 ECU ECM Engine and renew cable are especially designed to fit Ktag V7.020 EU version in red PCB.

Version 1 with 4 LED:

Source http://www.obd2eshop.com/wholesale/ktag-eu-online-version-with-4-led.html

Version 2:

Source: http://www.obd2eshop.com/wholesale/ktag-v7020-red-pcb-eu-online-version.html

How to update Kess v3.099 to Kess v5.028

Kess v2 version 3.099 to 5.028 update tutorial - This topic is for information and educational purpose only.

(Big thanks to kitnoos2002 )



Pics from Russian KESS 5.028.

Kess 5.028 from 16pin.
I reworked the SD card on a genuine Sandisk Ultra.

Here are high resolution pictures from 16pin KESS 5.028

For now I only changed the SD card.

PCB is good.

I have already changed SD card with a Sandisk.
I will change some transistors PD with A6C.
I will change all China capacitors with Panasonic capacitors.
I think buzzer is useless but I have a spare buzzer muRata here.



Kess 5.028 PCB naked VS reworked : 

Examples of genuine parts VS Kess clone parts : 

I advise to rework it like all China Kess.
For now it work well with all protocols tested, like Kess v2 5.017.
I have not tested Virtual Read.

Some people have suddenly had their SD card corrupted, so I would recommend to make a backup of the original SD card before using the Kess.

You can make a backup with the software "ImageUSB"

If at insertion the computer ask to format the SD card, don't format it !!!



Note that, 16pin just updates Chinese Kess v3.099 to v5.028 but they are not reworked.





I continue to make my interface more reliable with Ksuite 2.47 that I modded to start with Kess v2 5.028 (or Kess v2 5.017).
Works perfectly and without USB dongle.

The benefits are many checksums and bugs corrected.

5.028 + Ksuite 2.34 don't support unlock PCR 2.1 through OBD
But 5.028 + Ksuite 2.47 maybe support unlock PCR 2.1 through OBD

(I have not personally tested unlock PCR 2.1 through OBD).



4.036 good china clone is confirmed to be able to to unlock PCR 2.1
5.017 + Ksuite 2.47 should have good luck with PCR 2.1 unlock



Kess v2 unlocks PCR 2.1 details: http://blog.obdexpress.co.uk/2018/11/12/how-to-obd-unlock-simos-pcr-2-1-with-kess-v2/


http://www.vxdiagshop.com/

Kess V2 unlocking Simos PCR 2.1 - connection, wiring, tips&guides

Possible to OBD unlock Simos PCR 2.1 with Kess V2 clone?

Look here: all information can be found here to help you unlock PCR 2.1 using Kess v2 china clone.

Connection:

ECU connection for the bootmode unlocking procedure only!

1. Connect the ECU to the bootloader adapter
2. Power up the bootloader adapter with a stabilized 12v power supply
3. Connect the cable 14P600KT02 to the 14P600BTLR adapter
4. Follow the instructions provided below

Wiring diagram:

1. Solder a wire to the CNF1 pin
2. Solder the 470 Ohm resistor on the two pads
3. Solder the 1K resister on the pad

 

Test:

Basic info:

Tested and confirmed working by me on 4 ecus /cars

only on Chinese clone not reworked unit: ktag 6.070, kess v2 v4.036, ksuite up to 2.15

Tips and guides of tools for use:

pcr 2.1 need to be as you know unlocked before writing .

On this ecu pcr 2.1, ksuite (kess v2 or ktag) seem to be more stable than fgtech on pcr but work too sometimes: i get error with fgtech on one pcr2.1 but no problem with ksuite . 

So if you have both tools , prefer ksuite seem to be more stable & flawlessly and car run ok .

After you get you ecu unlocked in boot mode , with fgtech just remove boot and left pin connection , and read or write on bench .

On ksuite tools , you can’t read or write with ktag , only unlock . (alientech need to work on it…)
with kess it’s ok , BUT , you can’t use the tricore module !

The problem is that the harness is plugged in the tricore module . so you have to build your own bench cable : just get a obd female plug on a scrapyard , and wire +12 gnd and can h/l (kline is not used but you can wire it it will make a universal bench cable) .

The trick to get communication error free on both fgtech and kess cable is to use a strong external psu .

when the tool id or read or write the ecu , the ecu will perform a kind of reset , and the big cap inside the ecu will go charging , causing a drop in voltage if your psu isn’t strong enough to handle it . THAT WILL CAUSE THE COMM ERROR . That’s the only thing you have to take care . 

when i made test with many little psu (like one you get with your tools) i have seen 7 volts drop some time , so the ecu is shutting down and no comm . 

you can use computer atx psu modded to work on bench (green wire plugged on ground to power on ) i think anything that can provide +12v 2A will be ok . i didn’t need more than 12v just a stable 12V . 14v unstable will not be ok 

that’s why on the car you have no problem , car battery can handle the cap charging current .

There is no immo caused comm error on this ecu , psu is the problem !!

So in conclusion : good psu and obd home made bench cable , remove tricore module on kess = 100% tested bench flashing solution for pcr2.1 .

 http://blog.obdexpress.co.uk/2018/11/12/how-to-obd-unlock-simos-pcr-2-1-with-kess-v2/

KESS V2 5.017 best price: Where to?

KESS V2 5.017 40% off:

http://www.obdexpress.co.uk/wholesale/kess-v5.017-ecu-online-version.html
Firmware version: 5.017
Software version: 2.47

Token: No token limitation!
Network: No limitation! It’s an online version!

Pcb: new red board (improved a lot based on the version 2017), the eu clone
1.the left upper corner and the lower right corner notch size is not the same
2.More than buzzer
3.WFs = Infineon, BCR112 NPN Digital Transistor
4.27E = ON Semiconductor NUP2105LT1G
5.6DW = NXP BC817,215 NPN Bipolar Transistor
6.A6c =MMUN2113LT1G / MMUN2113LT3G
7.K5B = BC807-25-7-F PNP Bipolar Transistor
8.Using imported Japanese Murata filter NFE61PT472C1H9L
Kess v2 2017 vs 2018:

http://blog.obdexpress.co.uk/2018/01/09/2018-kess-v2-5-017-vs-2017/

For the new pcb, you have to read : http://blog.obdexpress.co.uk/2018/09/10/kess-v2-red-reviews-from-a-real-professional/

Language: English, German, Spanish, Italian, Portuguese, French
O.s.: Windows XP, Windows 7 32bit (best), Window 8

Features:

1. Check the battery voltage in real time
   2. Full Recovery function in case of problems
   3. Automatic Checksum Correction, (where available)
   4. Complete integration with ECM Titanium, which means it can be perfect with ECM Titanium
   5. Management of the programming counters
   6. Delete ScanTool function DTC
   7. Different reading / writing speed options
   8. Option to write full filection of the card
   9. Boot Loader Mode Supported

Car list: the original kess v2 car list + 7400 new vehicles

Free download:
Kess v2 5.017 full car list
Kess v2 full protocols
Kess v2 reviews
Kess v2 best price