(Solved) FGTech Windows 10 Error: Driver is not digitally signed

Here are FGTech Galletto Windows 10 installation tips and guides, including how to solve FGTech error “driver is not digitally signed”

It’s possible that the PC cannot recognize the device, after you have installed Setup.exe in Windows 8 and made it connected by the USB cable.

The reason can be: the driver is not installed

If you try to install the driver manually through the peripheral management it will display the following error message: This driver is not digitally signed

It’s possible to solve the program in Windows 7 operation system

Even if it does not accept the driver manually, you can disable the control if the driver signing

Here you go...

Reboot the PC in an advanced mode

On Desktop, open the Charm Bar to the right can click on Change PC Settings

Now. Click on General - Restart now

PC will restart in an advanced mode

On windows 10, it will appear the following interface

Click on Troubleshoot - Advanced options - Startup Settings - Restart

PC restarts, then go to Startup settings

Disable driver signature enforcement

PC will restart

Then you can install the FGTech driver

Galletto V54 Windows 10 64 bit Review:

i have probation galletto on windows 10 64 bits and work s good.

soft is from fantomel post "rework and up loads v54 to v53 0475 fw."

mostly problems with software no open is pc or laptop

trying on sony vaio netbook no work

Acer aspire 5920 ati video no work

HP Compaq 610 nvidia work good

Acer Aspire 6930 nvidia work good

read fantomel post download software install C/Fgth .

plug galletto usb install driver from software C/Program files/Fgth/drivers.

many problems is pc with amd procesors and ati video card NO WORK

Have fun

Source:http://blog.obdexpress.co.uk/2018/09/13/how-to-install-fgtech-galleto-on-windows10/

Kess V2 (red board) reviews from a real professional

A lot of Kess V2 (red board) reviews and ideas from a real professional @euromod:

... just observe the pcb and random choose some parts on Kess V2 red board , then search them on tme / farnell / etc and also search for the same part on alibaba or similar china site. you will see different markings , labels of the clone parts .... and .... prices
but you already know that , I`m sure ...
here are some examples ,
in green fake , SK14

in green fake UL46

in green fake 27E diode

left side , fake 5V voltage regulator,

in green , fake 3.3V voltage regulator. in this picture you can observe also the genuine ST L9613B Kline interface

other genuine parts mounted

genuine Murata oscillator (on PCB) vs fake one

I have on another PC all the comparative photos because I used to rework this units.
.... anyway I will stop here because it`s a waste of time debating on this subject.
if you state that those clones are made with genuine parts (or the cloned parts are working like the genuine ones) I have no problem with that

Edit to update: just search for the parts I posted , fake Murata logo , fake ST logo , fake Texas Instruments logo.
mate , please feel free to send one of those parts via post mail to the original producer and you will have the right answer....
... as with all clones from opcom to ktag I don`t trust nobody and when possible I replace all parts with good parts from a good brand and trusted part supplier trying to minimize potential problems.
you defend the low cost parts saying also that those parts are not illegal ...
.... how about the clones build from these parts? are they legal?
on the other hand just do an firmware upgrade on this , and you will see how genuine is ....

and the genuine unit cost 10 euros ... (more then the whole cinese opcom , factory price is 2$ if you buy more. they can put your name on the IC , no problem)
the genuine part:



Credits to euromod
Source: https://mhhauto.com/Thread-Kess-V2-....-RED
Reliable source to get Kess V2 red: http://www.obdexpress.co.uk/wholesale/kess-v5.017-ecu-online-version.html


http://blog.obdexpress.co.uk/2018/09/10/kess-v2-red-reviews-from-a-real-professional/