Thursday, February 9, 2017

How to update Ktag/Kess v2 software to Ksuite v2.11

Hi guys, good news for you all. i have updated my Kess V2 2.10 with firmware 3.099 to 2.11 software. And also use the Ksuite 2.11 to get it run on Ktag with 5.010 fw. Everything works great in Kess + Ktag.
Software Ksuite 2.10:
kess-v2-ksuite-2.11-update-
Lets see what you need :
1.First you need to download files for your sd card
Ktag 2.11 SD card Files
This is not uploaded by me
2.You need to download Ksuite 2.11 files
Kess 2.11.exe
incl 4 files: part 1-part 4
If you got security pop up just ignore that..
kess-v2-ksuite-2.11-update-3
This image is on my language for you be different but for English user to ignore this go on “Details” bottom left corner , when open new text just click “Visit this site” something like that
AFTER DOWNLOAD DISCONNECT FROM INTERNET ITS SAFIER FOR YOUR KESS YOU CAN FORGOT TO DO IT LATER
When you download all that you need to open kess v2 tool box and unscrew this 4 screws:
kess-v2-ksuite-2.11-update-4
When you unscrew just pull out the mainboard
P.S Unplug from electricity 
In red area, it is the sd card for the kesskess-v2-ksuite-2.11-update-5
Get out sd card . I used android phone to connect card and PC
When you open sd card you will got this 4 folders:
kess-v2-ksuite-2.11-update-6
Make a backup like a did , just copy this file to new folder and rename it Kess 2.10 files etc etc what you like…
I make like this
kess-v2-ksuite-2.11-update-7
Make sure to save this if something goes wrong
After you make a copy delete all from Kess SD card .
Than copy SD 2.11 files to Kess SD card
When its done , bring back SD card to Kess mainboard make sure to put it right and lock her.
When you lock sd card put back mainboard into kess box and close it with screws.
DO NOT CONNECT YET KESS WITH PC OR POWER JUST MOVE TO THE SIDE
We finished First part of this
Now to install 2.11 Software to pc
Unpack all downloaded parts to one folder (i mean on Ksuite part 1,2,3,4)
Just look this video it’s better to see than to read
VIDEO: HOW TO INSTALL KESS 2.11 TO YOUR PC


Watch from 1:05 to 2:30
Just copy all new files to Ksuite folder its easy , but i suggest to make a copy of old files
When process finish you got Ksuite with 2.11 software
Some pictures after updating
PLS DO NOT CONNECT TO INTERNET WHEN YOU USE KESS v2 EVEN IF IT IS “UPDATED”
Pictures:
kess-v2-ksuite-2.11-update-8 kess-v2-ksuite-2.11-update-9 kess-v2-ksuite-2.11-update-10
Note: kess v2 & ktag software update solutions above are offered by Nemanja in the CT community. (BIG THANKS!!!!!!!!!!!!!) BUT it’s not tested by pros. Not sure that it works for all kess/ktag. Probably use with unknown security.

For sake of security, you can try tested versions:

And if K-suite v2.11 is too old for you, newer versions also have tested OK by pros:


Except software update, firmware update is available at obd2epress.co.uk.

Sunday, February 5, 2017

Ktag Ksuite 2.28/2.31: No internet connection

I used K-suite 1.93 or 2.10 and works well, but now I have dump from car that this versions not recognize it and I want to use newer software for my KTAG programmer.
Tried install Ksuite 2.28 and 3.21 but on startup give me same error about: “Connection to the internet not detected: check that you have a working internet connection then try again.
When I click “OK” Then main menu shows, but almost all are grey. Older versions still work without problem.
ksuite-2_28-problem

How do people think of Ksuite 2.28 or 2.31 start problem? Here you go…

from v2.26 ktag working only with internet connection

2.25 Last working soft since now

there is no point using this software with your clone
install it, then overwrite it with the 2.11

If CKS not work, Install newer KSuite except the C++ Runtime, and without deinstall, install 2.08.
Then it works.

Did you try with Kess v2 on Bench? Connecting with universal cable? Without Boot Mode?
Kess v2 china clone has been verified to work no issues with Ksuite v2.28.
If all not work, then get an MPPS and try. MPPS is always a good backup tool specially for VAG. Some ECUs do so weird things, nobody can explain, this is why most tuners have more than one tool from different companies.


So, choose a lower version ksuite for Ktag clone or a tested ksuite 2.28 working perfect with kess v2….





Autelsale-Autel authorized dealer-dealing in original Autel obd2 tools