GODIAG OBD2 Jumper cooperates with PCMtuner MPM Tool to read ECU

 This is reading 2007 Cadillac E67 GM ECU with MPM Chip Tuning Tool + GODIAG GT105 Adapter to do power setting and DTCs blocking. ECU module should be removed from vehicle. By connecting to GT105, we can check whether the ECU is working properly.

Tools:

Cadillac ECU Module

MPM ECU-TCU Tool

GODIAG GT105

Programming Power Supply

GODIAG Full Protocol OBD2 Jumper(Supports use alone or MPPS/KESS V2, etc.)

Connection

Connect ECU & GT105 via jumper cables, which can work as Tricore cables to read ECU.

Connect MPM to computer & GT105.

Turn ignition on. GT105 blue lights will flash once the ECU starts data transmission. That means the ECU can communicate normally.

Read ECU

Open MPM HPtuners software to identify VIN,

Select ECU model: E67 GM Gen4 >> Read entire >> Read

MPM will starts reading automatically… just wait 2 minutes.

Meanwhile, you can see the GT105 blue lights keep flashing during whole process.

Save file after reading.

Done.

Quite easy, simple operation as PCMTuner. With above tools, for car owners who need to adjust ECU can send for MPM processing. Once done, just reinstall ECU back to car.

Read also:

Free download MPM ECU-TCU Chip Tuning Tool Software 4.10.4

How to solve PCMTuner Bench mode not work? (attached wiring diagram)

Here share the solution to resolve PCMTuner cannot work on bench mode, and also provide the PCMTuner Module 58/61/71 wiring diagrams for users to quickly view the wiring diagram offline without network, and for some users who only have our PCMTuner Smart Dongle as well.

PART 1: PCMTuner Bench Not Working Solution

The possible causes:

The cable is not connected correctly between PCMTuner Magic Car Tool and ECU.

Select an incorrect protocol (ECU model) in pcmflash software for ECU reading and writing.

Using other power supply not PCMTuner cause the burning of the device transistor.

The corresponding solutions:

1. Make sure the device and ECU connection via bench cable is proper.

2. Select the correct protocol (ECU model) in pcmflash software when reading or writing ECU.

3. Do not plug in a separate 12V when you use OBD for power supply, otherwise, it will cause the device transistor or step-down chip to burn.
MUST USE PCMtuner professional power supply!

If you use your own lab power and voltage regulator, you cannot know how device power works, and just adjust the voltage to 13.5 or whatever you think will cause the whole triode to burn out.

If the PCMTuner transistors are burnt, you need to replace transistors.

The transistors need to be replaced:

• N1 transistor: with MMUN2113LT1G
• N2, N3 transistor: with MMUN2211LT1G

Check the corresponding positions marked below:

• Q3, Q9, Q10, Q11 transistor: with MMBT2222A-7-F

Check the corresponding positions marked below:

PART 2: PCMTuner Module 58/61/71 Wiring Diagram

Free download PCMTuner 58, 61, 71 protocols instruction

PCMTuner Module 58

Temic DSG/CVT

Function

DQ200MQB/G2 (0CW)

DQ250MQB (0D9)

Reading, writing, checksum correction

VL381/DL382 (0AW/0CK)

DL501/G2 (0B5)

DQ200 (0AM)

DQ250E/F (02E)

VL300/V30 (01J/0AN)

Writing, checksum correction

DQ200/MQB/G2 Boot (EEPROM)

DQ250E/F/MQB Boot (EEPROM)

DL501/G2 Boot (EEPROM)

VL381 Boot (EEPROM)

DL382 Boot (EEPROM)

Honda UDCT Boot (Continental TC1782/EEPROM)

Reading, writing

DQ200/MQB/G2 Boot (MICRO)

DQ250E/F/MQB Boot (MICRO)

VL381 Boot (MICRO)

DL501/G2 Boot (MICRO)

DQ500 (0BH/0BT)

VL300/V30 BSL (FLASH)

VL300/V30 BSL (EEPROM)

DQ250C (02E)

DL382 Boot (MICRO)

Honda UDCT Boot (Continental TC1782/MICRO)

Reading, writing, checksum correction.

VAG DQ200 (0AM, 0CW) TCU

VAG DQ250 (02E, 0D9) TCU

VAG DQ500 (0BT, 0BH) TCU

Audi V30 (01J)/VL300 (01J) TCU

Audi VL381 (0AW) TCU

Audi DL501 (0B5) TCU

Audi DL382 (0CK) TCU

Renault DC0/DC4 Gen2 TCU

Honda LuK-UDCT TCU

PCMTuner Module 61

Kia Hyundai CPGDSH/CPEGD

1.6L (CPGDSH2.24.1/CPEGD2.20.1/UDS

Reading, writing, checksum correction.

1.4T, 1.6L (CPEGD2.20.3/CPEGD2.20.4/UDS) — requires a direct connection to the ECU

1.0L, 1.2L (CPEGP2.10.1/CPGPSH2.14.1/UDS)

Reading, writing, checksum correction, unlocking

CPEGD2.20.x

CPEGP 2.10.1

CPGDSH2.24.x/2.26.x

CPGPSH2.14.1

PCMTuner module 71

PCMTuner Bosch MEDC17 Bootloader

(direct connection to the ECU connector, Scanmatik 2 Pro, a connection cable, and a power supply are required)

MEDC17 (TC1762/1766/1792/1796) FLASH

MEDC17 (TC1724/1728/1767/1782/1784/1797) FLASH

MEDC17 (TC1791/1793) FLASH

Reading, writing, checksum correction.

MEDC17 (TC1762/1766/1792/1796) EEPROM

MEDC17 (TC1724/1728/1767/1782/1784/1797) EEPROM

MEDC17 (TC1791/1793) EEPROM

Reading, writing.

MEDC17 BSL PASSWORD

Reading.

Module 71 includes lots of ECUs and pinout diagrams.

The module 71 wiring diagrams are available in the download link above.

www.obdexpress.co.uk

Solution: PCMTuner Device No Response, Cannot Be Found etc, Problem

 Good to know:

PCMTuner software has updated to V1.2.6 now.

PCMflash software still be V1.20, don't update it to other higher version.

PCMTuner V1.2.6 update info:

• MPM option is operational
• Scanner option is operational
• Metrotech button add and will come soon

PCMtuner common problem and solution:

1. Problem: Cannot connect to computer. There is no response when connecting to computer.

Solution: The reason is that the power supply of pcmtuner is divided into USB communication power supply and PCB host power supply. Many users often plug USB into the system separately and no PCB power supply leads to no reaction of the device.

2.Problem: Sometimes PCMTuner software prompts the device cannot be found when identifying and reading data.

Solution: In this case, just plug and unplug the adapter power supply.

3. Problem: PCMTuner software shows not active.

Solution: After you register, just wait for 24 hours, and the factory will activate for you automatically. No need to offer an email to the seller to activate now.
If over 24 hours, still not activated, can ask your seller to check for you.
NOTE: if you change the computer to install, still need to ask YOUR SELLER to re-activate for you
Remember one tool, one email, one computer!

4. Problem: The PCMTuner Smart Dongle or PCMTuner device cannot be found.

Solution: Plug in the PCMTUNER ECU Programmer to supply power, and connect USB and Smart Dongle as well.

5. Problem: Where to log in account?

Solution:

• vz-performance.com: User Name is your registered Email and Password is the PCMtuner Serial Number.

This account will be used for tuner support. It has VR file and many damaos there.

• tuner-box.com: User Name is your registered Email and Password is the PCMtuner Serial Number.

This account will be used for checking the support list of PCMtuner, creating ticket support tool user, etc.

6. Problem: PCMTuner Dongle gets heat.

Solution: There is a chip inside of the dongle, it is set as a safety factor, and it is the reason for the dongle getting hot.
If your dongle is overheating, please contact our customer service to help you remove it.
DON'T DO IT yourself if you did not contact the engineer, or it will lock the dongle.
Besides, we have returned our stock back to the factory for testing, New stock will come after 5 days, and there is no problem with the dongle for the new stock.

7. Problem: Will the device burn if use another power supply, not PCMTuner?

Solution: Don't use your power supply, or it will burn triode easily.
If you use OBD for power supply, please do not plug in a separate 12V, otherwise, it will cause the device transistor or step-down chip to burn.
MUST USE PCMtuner professional power supply!
If you use your own lab power and voltage regulator.
You don't know how device power works.
Just adjust the voltage to 13.5 or whatever you think will cause the whole triode to burn out.

Kindly notice:

PCMTuner Magic Car Tool supports OBD, bench, and boot modes.

Users often choose other protocols after the connection diagram is completed. If the cover of the connection diagram is not opened, please choose protocol 71, which corresponds to the MCU of your ECU. The MCU is indicated inside the PCMTUNer wiring diagram.

Toyota, Volkswagen, Audi and Honda can select virtual files. To select virtual files, ID must be identified first, and then the corresponding ID number should be retrieved, or sw software number, or part number, corresponding to the downloaded file.

www.obdexpress.co.uk

How Activate PCMtuner and get WinOLS Damaso file?

I bought a PCMtuner ecu programmer. I have already downloaded and installed WinOLS from support.vz-performance.com. When I opened it to use, the software required me to activate with user name and password. How to activate?

obdexpress.co.uk technician replied:

Just click 'Register now…' in the WinOLS software to register by yourself, no need to be activated by factory.

But you need to pay for the registration. After that, you can use WinOLS damaso file, WinOLS damaos and MAP package for free. Just click search, then type what you want, there will have. If there is no file you want, create ticket to contact factory.

For any problems, please feel free to contact our customer service(obdexpress.co.uk).

PCMtuner ECU Services usage process description

 Attention please DO NOT upgrade PCMflash 1.20 version while updating V1.25 PCMTUNER. Otherwise, PCMtuner Dongle will be unable to identify. Here we provide PCMflash 1.20 software free download link for misoperation.

Free download PCMflash 1.20 app

System: Win10

Size: 11.8MB

Uninstall PCMflash new version only;

Re-install PCMflash 1.20.

How to use PCMtuner to do ECU Services?

This is an operation guide on using PCMtuner to do ECU services, including power adjustment, immo off, dpf/egr remove, dtc shielding, etc.

Step1. Read flash data of the ECU via Pcmtuner.

Note: For only buying PCMtuner Dongle users, need to use other device to read flash data. Eg. Tactrix Openport 2.0, Scanmatik 2 PRO,etc.

Click “Read >> Save”

Step2. Send info & requirements to factory for revision.

Information: ECU flash data + car model + ECU model

Requirements:

Verifythe payment has been finished.

Explains ECU services needs.(eg.power transfer, immo off, dpf/egr remove, dtc shielding, etc.)

Step3. Write processed flash data back to ECU via PCMtuner.

Factory will send back processed flash data, just write back to ECU.

Load file >> Write

Technical support

www.obdexpress.co.uk

PCMtuner usage report: Successfully read BOSCH MEV17.2.1 on Bench

 This is a tutorial on how to read 2012 BMW 3 series ECU with PCMTUNER Tool on bench. Due to data loss, we should get ISN from EEPROM to repair CAS data. For other cases of ECU reading may follow the same way.

Procedure

Step1. Connect ECU to PCMTUNER

Start PCMTUNER software to search ECU model. (Users can send customer service ECU outside label to get corresponding specific model if in need).

In this case, it's BOSCH MEV17.2.1.

Check ECU Model & Connection Diagram

BENCH >> INSTRUCTION

Here we can check if the selected ECU model is correct.

And connect PCMTUNER to ECU according diagram.

*It should be noted that wire connection is based on instructions rather than colors.

Eg. 1a/1b represents ECU position; A1/A4 represents wire tag.

Record MCT No.

It's TC1796, in the connection instruction.

Step2. Read ECU

Go into "READ and WRITE" to select options;

ECU: MEDE17(TC1762/1766/1792/1796)EEPROM

Click "Read".

Would you like to use automatic power control (L-Line)? Yes.

Reading data successfully.

Save EEPROM data.

Now we can find out ISN in EEPROM to repair BMW data.

This is how to use PCMTUNER ECU Programmer to read BOSCH MEV17.2.1 on bench.

Read also:

PCMTUNER or CGDI FC200 ECU Programmer, Which to Buy?

What's wrong with PCMtuner VZ-Performance unable to log in?

 I can use PCM Tuner, but I can't access vz-performance and get the error prompt 'Wrong username or password'.

The solution offered by obdexpress.co.uk engineer:

Install pcmtuner software and finish registration first.

Then contact our customer service to activate your register email.

After activation, you will get one account to access https://support.vz-performance.com and https://www.tuner-box.com.

User Name= registered Email, Password= Software Serial Number

The serial number (password) can be found at the bottom left corner of PCMTuner 1.23 software.

Note: These two website account were different before. But from April 19th, 2022, activation only generates one user account.

• tuner-box account is for create ticket support tool user.
• Vzperofromance is for tuner support. It has VR file and many damaos there.

The factory will synchronize the serial number in the next update.
It will fix this bug. So users don't need to activate vz-performance separately.
Please do activation until the next software update is released.

For any problems, please feel free to contact our customer service(obdexpress.co.uk).

2022 PCMTuner 1.23 vs. ECUHELP ECU Bench Tool

 2022 ECU programmer comparison: PCMTuner 1.23 Magic Car Tool and ECUHELP ECU Bench Tool.

To sum up:

1.PCMTuner advantages:

• Support ECU reading via OBD
• Support gearbox reading and writing
• Support Pinout comewith

2.ECU Bench Tool advantages:

Support the following ECUs via Bench while pcmtuner doesn't support.

• Bosch MDG1 based on Motorola MPC5777 / Aurix TC2xx microprocessor
• Bosch EDC16 based on Motorola MPC5xx microprocessor.
• VAG MED9 based on Motorola MPC5xx microprocessor
• Price is cheaper

How to use PCMTuner and ECU Bench Tool?

1.PCMTuner

Connection diagram (via OBD/Bench/Boot)

 

Pcmtuner software download

PCMtuner software installation and use video:

https://youtu.be/GoWLWuZdxmw

Reference: V1.21 PCMtuner software installation guide

Please kindly notice:

The newest pcmtuner software is V1.2.3 now. It has fixed the register problem and displays the expiry date at the bottom right corner. Update the software directly in your pcmtuner ECU programmer.

Don't update pcmflash software!!!

2.ECU Bench Tool

Connection diagram (via Bench)

ECU Bench Tool software download

ECU Bench Tool software installation and use video:

https://youtu.be/KZVUlftG7Wc

Reference: ECU BENCH TOOL Software Free Download & Installation Guide

PCMTUNER or CGDI FC200 ECU Programmer, Which to Buy?

 2022 best ECU programmer: PCMTUNER or CGDI FC200, which one to buy? Both tools were well received since released. Which one is more recommended?

Obdexpress.co.uk engineer suggested:PCMTUNER is used to program gearbox & ECU more while CGDI FC200 works for BOSCH ECU more. It’s mainly depended on the supported ECU coverage. Both are professional ECU tools. Any questions welcome to contact online service for a check.

However, if you want to know more differences, move forward. Below is a comparison table to let you be clear at a glance.

PCMTUNER vs. CGFC200

Differences

PCMTuner supports to work on Bosch, Magneti Marelli, Continetial or Siemens while CG FC200 only supports Bosch and certain old Siemens.

PCMTuner supports paid virtual reading online while CG FC200 does not.

PCMTuner has its own tuner account for paid dpf, egr, adblue off and remap while CG FC200 does not.

PCMTuner supports to do checksum while CG FC200 is only workable online during subscription period.

CG FC200 has more protocols than PCMTuner.

CG FC200 support multi-languages while PCMTuner only supports English & Russian.

CG FC200 supports to read & modify BMW ISN, VIN while PCMTuner cannot.

PCMTuner is cheaper but cannot do BMW ECUs(EDC17xx, etc.)

Conclusion

For mainly doing ECU chip tuning or programming more ECUs, PCMTuner is recommended & good-value.

For reading & modifying BMW ISN or programming mostly Bosch ecus, CG FC200 is recommended.

Anyhow, it’s never wrong to choose according to needs. For more Car ECU Programmers, please visit www.obdexpress.co.uk